Products & Solutions
High Performance Programmable AC Power Source
AFV-P Series is a programmable AC power source with DC output and precision measurement. This compact power source provides clean power with THD less than 0.3% at 5-100 Hz and it delivers output voltage of 0-310 V (Upgraded ver. 0-350 V) and frequency of 15-1000Hz (opt. 5-2000 Hz). It is ideal for commercial test applications from quality assurance, design verification, ATE to mass production.
-
Overviews
-
Specifications
-
Key Features
-
Ordering Info
-
Documentation
-
Videos
AFV-P series
AFV-P Series is a programmable AC power source with DC output and precision measurement. This compact power source provides clean power with THD less than 0.3% at 5-100 Hz and it delivers output voltage of 0-310 V (Upgraded ver. 0-350 V) and frequency of 15-1000Hz (opt. 5-2000 Hz).
-
2U/4UCompact Sizes 2U : 600VA / 800VA / 1250VA / 1500VA / 2500VA / 3000VA 4U : 5kVA / 6kVA
-
9 timesHigh Inrush Current AFV-P-600 and AFV-P-1250 are capable of delivering up to 9 times of peak current, which is suitable for verifying ATX 3.0 standard
-
≦0.3%Low THD Total Harmonic Distortion is only under 0.3 % when output power is under 100 Hz
-
AC&DC OutputAC source with DC output One machine with AC Output and DC Output to extend more applications
-
0-310V/0-350V5-2000HzWide Output Wide output Voltage and Frequency ranges.
-
≦300uSFast Response Time The slew rate less than 300 µs from 0~90% output voltage
Panel Description
- 1 Power Switch
- 2 Touch Screen HMI
- 3 Rotary Knob
- 4 Output / Reset
- 5 AC Output Socket
- 6 Output Terminals
- 7 Remote Sense
- 8 USB Interface
- 9 RS-232 / RS-485
- 10 Ethernet Interface
- 11 Input Voltage Selector
- 12 PLC Remote In/Out
- 13 Input Socket
- 14 USB Interface
- 15 Sync. Signal I/O
AC & DC Output
Intuitive Touch Screen Control
To create a complex sequence on the HMI is no longer a difficult task for AFV-P series. The 5 inches touch screen provides users a clear display and an easy set up. AFV-P is also equipped with a rotary knob for better fine tune adjustments.
Programmable Simulations: Transient Feature
Ideal for High Inrush Current EUT & Start / End Angle Setting
Multiple Communication Interfaces & Control Software
Programmable Simulation: Step & Ramp Features
Ramp and Step feature allows users to define slew rate of voltage and frequency at each Step. Users can set the rise/fall time, time unit and voltage/frequency change between Steps to create a wide range of waveform. Additionally, Ramp feature can effectively reduce the inrush current by simulating soft start for motor or compressor startup.
Fast Response & High Stability
AFV-P series is a high performance AC source with fast response time, low total harmonic distortion and tight voltage regulation. With its technically advanced features, users can easily simulate power line disturbance, such as sags, surges, dropouts and spikes.
AFV-P Series is a programmable AC power source with DC output and precision measurement. This compact power source provides clean power with THD less than 0.3% at 5-100Hz and it delivers output voltage of 0-310 V and frequency of 15-1000Hz (opt. 5-2000 Hz). It is ideal for commercial test applications from design verification, quality assurance, ATE to production line.
-
Output Power
Single Phase: 600VA / 1.25kVA / 2.5kVA / 5kVA; Upgraded ver. 800VA / 1.5kVA / 3kVA / 6kVA
-
Output Voltage
- 0~155V; Upgraded ver. 0~175V(Low Range)
- 0~310V; Upgraded ver. 0~350V( (High Range)
- 0~620V, 0~1240V (opt.)
-
Output Frequency
- A ver.: 5~2000Hz
- B ver.: 15~1000Hz
-
THD
≦ 0.3% at 5~100Hz, ≦ 0.5% at 101~500Hz, ≦ 0.8% at 501~1000Hz, ≦ 1.5% at 1001~1500Hz, ≦ 2% at 1501~2000Hz (Resistive Load)
-
Load Regulation
≦ 0.07% F.S. (Resistive Load)
-
Crest Factor
≧ 3
-
Inrush Current
≧ 4.5/ opt. 9 times of max.output current (rms)
-
Response Time
≦ 300 μs
-
DC Output Voltage
0~210V / 0~420V; Upgraded ver. 0~240V / 0~480V
-
Input Voltage
- AFV-P-600 & AFV-P-1250: 98~132VAC / 196~264VAC
- AFV-P-2500 & AFV-P-5000: 196~264VAC (opt. 175-235VAC)
- AFV-P-800 & AFV-P-1500: 90~264VAC / 196~264VAC
- AFV-P-3000 & AFV-P-6000: 180~264VAC
-
Input Frequency
47~63Hz (opt. 400Hz)
-
Interfaces
- Standard: RS232 / RS485 / Ethernet / USB / PLC Remote In&Out
- Optional: GPIB / Analog
-
Dimensions (HxWxD)
- AFV-P-600 & AFV-P-800 & AFV-P-1250 & AFV-P-1500: 89 x 442 x 495 mm
- AFV-P-2500 & AFV-P-3000: 89 x 442 x 650 mm
- AFV-P-5000 & AFV-P-6000: 176 x 442 x 665 mm
-
Weight
- AFV-P-600: 16kg (35.2lbs)
- AFV-P-800: 12.9kg (28.4lbs)
- AFV-P-1250: 20kg (44.1lbs)
- AFV-P-2500 & AFV-P-6000: 31.3kg (69lbs)
- AFV-P-3000: 17.2kg (37.9lbs)
- AFV-P-5000: 61.5kg (135.58lbs)
- Compact and high power density: 600VA to 2500VA & 800VA to 3000VA is only 2U, and 5000VA & 6000VA is 4U.
- AC source with DC output: extend the applications to DC testing.
- Wide output voltage of 0-310V (Upgraded ver. 0-350V) and output frequency of 15-1000Hz (opt. 5-2000Hz).
- THD is only under 0.3 % when output power is under 100 Hz.
- Ideal for inrush current: capable to deliver up to 4.5/opt. 9 times of peak current and verify compliance with the ATX 3.0 standard.
- Start/End phase angle: users can define the start and end phase angle from 0° to 359°.
- Current foldback feature: have output current maintain constant based on the load which output voltage varies.
- STEP and RAMP function: ideal for voltage and frequency variation tests and effectively reduces the inrush current during motor startup.
- TRANSIENT generation provides users an easy setup for power line disturbance (PLD) simulation.
- Free control software and LabVIEW driver: allow users to easily program and remote control.
- Users can quickly set and view the parameters via 5 inches touch panel or rotary knob, which provides an easy operation and measurement display.
- High slew rate: less than 300 μs from 0~90% output voltage.
- AFV-P-600A High Performance Programmable AC Power Source( 600VA/310VAC/5-2000Hz )
- AFV-P-1250A High Performance Programmable AC Power Source( 1.25kVA/310VAC/5-2000Hz )
- AFV-P-2500A High Performance Programmable AC Power Source( 2.5kVA/310VAC/5-2000Hz )
- AFV-P-5000A High Performance Programmable AC Power Source( 5kVA/310VAC/5-2000Hz )
- AFV-P-600B High Performance Programmable AC Power Source( 600VA/310VAC/15-1000Hz )
- AFV-P-1250B High Performance Programmable AC Power Source( 1.25kVA/310VAC/15-1000Hz )
- AFV-P-2500B High Performance Programmable AC Power Source( 2.5kVA/310VAC/15-1000Hz )
- AFV-P-5000B High Performance Programmable AC Power Source( 5kVA/310VAC/15-1000Hz )
- AFV-P-800A High Performance Programmable AC Power Source( 800VA/350VAC/5-2000Hz )
- AFV-P-1500A High Performance Programmable AC Power Source( 1.5kVA/350VAC/5-2000Hz )
- AFV-P-3000A High Performance Programmable AC Power Source( 3kVA/350VAC/5-2000Hz )
- AFV-P-6000A High Performance Programmable AC Power Source( 6kVA/350VAC/5-2000Hz )
- AFV-P-800B High Performance Programmable AC Power Source( 800VA/350VAC/15-1000Hz )
- AFV-P-1500B High Performance Programmable AC Power Source( 1.5kVA/350VAC/15-1000Hz )
- AFV-P-3000B High Performance Programmable AC Power Source( 3kVA/350VAC/15-1000Hz )
- AFV-P-6000B High Performance Programmable AC Power Source( 6kVA/350VAC/15-1000Hz )
- AFV-P-T620A 620V Transformer Box( AFV-P-600 & AFV-P-1250 )
- AFV-P-T620B 620V Transformer Box( AFV-P-2500 )
- AFV-P-T620C 620V Transformer Box( AFV-P-5000 )
- AFV-P-T1240A 1240V Transformer Box( AFV-P-600 & AFV-P-1250 )
- AFV-P-T1240B 1240V Transformer Box( AFV-P-2500 )
- AFV-P-T1240C 1240V Transformer Box( AFV-P-5000 )
- AFV-P-001 RS-232/RS-485/USB/Ethernet Interface
- AFV-P-002 GPIB Interface
- AFV-P-003 Analog Control Interface
- AFV-P-004 RS232 Cable (1.8m / Female to Male)
- AFV-P-008 Input Power Cable 1.8M (for 600VA)
- AFV-P-009 Input Power Cable 3M (for 1.25kVA/2.5kVA)
- AFV-P-010 Input Power Cable 5M (for 5kVA)
- AFV-P-011 Input 400Hz (at input 110V/220V ±10% )
- AFV-P-012 Output 320V (at input 110V/220V ±10% )
- AFV-P-013 LED TRIAC Dimmer Simulation
- AFV-P-014 Output 9 times of Inrush Current (AFV-P-600 & AFV-P-1250)
- AFV-P-015 IEC-61000-4-11 Simulation
-
High Performance Programmable AC Power Source - AFV-P Series
-
AFV-P Series - How to simulate for IEC61000-4-11 standards
-
LED TRIAC Dimming Simulation
-
AFV-P series-Transient Simulation
-
AFV-P Series-9 Times Inrush Current Capability
-
How to connect AFV-P to the Preen Program?
-
︱Major Upgrade︱ AFV-P series : Higher Power ? Better Performance